Notching Machine
High precision, long life, low noise notching machine for “V” specimens’ preparation according to ASTM E23 and ISO 148 standards and “U” specimens’ according to
16 February 2021
High precision, long life, low noise notching machine for “V” specimens’ preparation according to ASTM E23 and ISO 148 standards and “U” specimens’ according to
AMSE offers a complete range of instrument to measure the polymers melt index. International reference standard: ISO 1133 and ASTM D 1238 Test methods Methods
Physical – Mechanical Measurement Pendulum Impact tester AMSE offers a complete range of instruments for polymer testing according to Charpy and Izod methods. The behavior
AMSE offers a complete range of instrument for the determination of polymers HDT and Vicat temperatures according to ISO 75, ISO 306, ASTM D648, ASTM
This type of equipment is used to notch polymer samples for Charpy and Izod impact tests. The machine is compliant with ISO 179, ISO 180,
This type of equipment is used to notch polymer samples for Charpy and Izod impact tests. The machine is compliant with ISO 179, ISO 180,
The device can be connected to a PC via RS232 for measurements reporting. Measurement field: 0 to 25mm Measurement accuracy: 0,01mm Resolution: 0,001 mm Force
The equipment consist in a motorized milling machine and a series of templates to reproduce the required specimen’s shape.
Environmental Stress Cracking is the main breakage cause of plastic components. The ESC can be defined as the acceleration of stress cracking due to contact with
Ball Drop Tester mod. XJB-30 AMSE Ball Drop is compliant with methods described in ISO 7765, ASTM D1709 and other equivalents. Instrument for impact tests on plastic
The instrument is used to determine the apparent density of granules and powders. It is suitable for quality control of raw materials. It is available in different models according
Instrument is used to determine the resistance of polyethylene samples according to the standards ISO 16770, ISO 899, ISO 3501 and other equivalents. Square cross
AMSE offers a complete system for resistance determination on hydrostatic pressure of thermoplastic pipes and fittings. International reference standards: ISO 1167, EN 921, ASTM D 1598,
System used to evaluate radial stiffness of clips from plastic pipes with a circular cross section. International reference standards: ISO 9969-2007, ISO9967 and other equivalents.
System used to determine critical pressure and temperature of the crack propagation on plastic pipes. It allows also to work at low temperatures through a
The machine is used to determine the opacity of pipes and fittings according to international standards ISO 7686 and other equivalents.
The system is used to determine the impact strength of plastic pipes with circular cross section. International reference standards: ISO3127, BS EN1411, BS EN744, ASTM
The system is used to determine the breakage of plastic pipes and fittings subjected to a specified internal pressure. International reference standards: ISO 10508, ASTM
The system is used to cutting and smoothing plastic pipes. Its strong structure allows processing of a wide range of pipes. All process are fully synchronized, allowing
Used to determine the impact strength of plastic pipes with circular cross section. International Reference Standards: ISO3127, BS EN1411, BS EN744, ASTM D2444 and equivalents.
The AMSE JBW series Charpy impact tester comply with all international standard:ISO 148, ASTM E23, EN 10045, GB/T3038-2002 and GB/T229-1994. Available model :150 J, 300J,
AMSE offers a full range of hollow die punch to obtain specimens of various shapes from samples of films, sheets of polymeric material and other materials by means of dies
AMSE offers a full range of hollow die punch to obtain specimens of various shapes from samples of films, sheets of polymeric material and other materials by means of dies
AMSE offers a complete range of climatic chambers with temperature and humidity control. Ideal to use in various fields including: polymers, metals, automotive, chemical, electronic,
Transverse slot-type click lens 0.7~4.5X, intuitive and simple magnification switch. Exquisite Stylish design. Equipped with coarse and fine adjustment elevator group, realize perfect focus and
High precision light pole toothless and fast moving locking device, to ensure the error of return travel is within 2um. High precision marble base and
When subjected to excessive exposure to UV rays many materials deteriorate their weather resistance. The UV lamps are used to reproduce a narrow range of
When subjected to excessive exposure to UV rays many materials deteriorate their weather resistance. The UV lamps are used to reproduce a narrow range of
Many polymer materials are often be damage by natural environmental factors which from Earth’s surface and atmosphere when used outdoor. This affects their useful life.
The unit can cool down 60 specimens with dimensions 10x10x55 mm in one cycle. Various models are available for limit temperatures of -30°C, -60°C, -70°C
The Q-Meter model 194 C is a laboratory instrument used for plastic characterization. It is used for measuring the capacity and delta tangent to the frequency.
Many polymer materials are often be damage by natural environmental factors which from Earth’s surface and atmosphere when used outdoor. This affects their useful life.
Many polymer materials are often be damage by natural environmental factors which from Earth’s surface and atmosphere when used outdoor. This affects their useful life.
Many polymer materials are often be damage by natural environmental factors which from Earth’s surface and atmosphere when used outdoor. This affects their useful life.
Used to measure tearing force of plastic films according to the Elmendorf method in accordance with international standards ASTM D 1922, ASTM D 1424, ASTM D
The instrument is used to determine impact force on plastic films according to ASTM D3420. It consists in a semicircular grip used to fix the film.
This machine is suitable for detecting the binding capacity of the hook and loop fastener ( Velcro tape) after the repeated stripping and fitting action.
Applicable extensive material abrasion characteristics, the testing area can take this apparatus directly which is the largest features of this tester, easy operation provided with
It`s used for determining the flexibility resistance or indicating the cracks of shoe or shoe sole through reciprocating flexing movements under the specified angle and frequency.
This machine is designed for flexing outsoles. It tests the specimen by simulating a personal walking in a normal way so as to determine the resistance
Chamber for fire tests according to international reference standards below: 94HB (ASTM D 635, ISO 1210) – Horizontal test 94 methods V0, V1,V2, (ASTM D
Professional forced ventilation and natural air convection oven suitable for all thermostatic applications where a specific precision is needed. Available Size: 40-60-80-120-250-400-700 Liter
Professional natural air convection oven and incubator for small scale thermostatic applications.
Professional incubator ideal for all incubating applications where a specific precision is required. Available size: 40-60-80-120-250-400 Liters
Professional incubator ideal for all incubating applications particularly where the need to work below room temperature is needed. Available Size: 120 – 250 – 400
Muffle furnace especially conceived for thermic treatment, cementation, refiring and normalization.
AMSE offers an instrument for the determination of the carbon black content according to ISO 2530 and ASTM D 1603. The carbon black content materials
Glow Wire apparatus is designed to simulate real work conditions when hot parts come in contact with materials that may burst to fire.
The teraohmeter model HM 307 DE , complete with measuring electrodes, complies with the international reference standards: ISO284, ASTM D257 and ASTM D1169 .
The apparatus performs comparative tests of tracking index of solid insulating materials in the presence of moisture. International Standards: IEC 60112, IEC 60335, IEC 60065,
The instrument is used for measuring the density of various plastic materials. Available in two versions: a single column or dual column so that it
