High precision, long life, low noise notching machine for “V” specimens’ preparation
AMSE offers a complete range of instrument to measure the polymers melt index.
AMSE offers a complete range of instruments for polymer testing according to Charpy and Izod methods.
AMSE offers a complete range of instrument for the determination of polymers HDT and Vicat temperatures according to ISO 75, ISO 306, ASTM D648, ASTM D1525 and other equivalent.
This type of equipment is used to notch polymer samples to be used for both Charpy and Izod impact tests.
This type of equipment is used to notch polymer samples for Charpy and Izod impact tests.
The device can be connected to a PC via RS232 for measurements reporting.
The equipment consist in a motorized milling machine and a series of templates to reproduce the required specimen’s shape.
Environmental Stress Cracking is the main breakage cause of plastic components.
AMSE Ball Drop is compliant with the method described in ISO 7765-85,ASTM D1709 and other equivalents.
The instrument is used to determine the apparent density of granules and powders. It is suitable for quality control of raw materials.
Instrument is used to determine the resistance of polyethylene samples according to the standards ISO 16770, ISO 899, ISO 3501 and other equivalents.
AMSE offers a complete system for resistance determination of hydrostatic pressure on thermoplastic pipes and fittings.
International reference standards: ISO 1167, EN 921, ASTM D 1598, ASTM D 1599 and other equivalents.
System used to evaluate radial stiffness of clips from plastic pipes with a circular cross section.
System used to determine critical pressure and temperature of the crack propagation on plastic pipes.
The machine is used to determine the opacity of pipes and fittings according to international standards ISO 7686 and other equivalents.
The system is used to determine the impact strength of plastic pipes with circular cross section.
The system is used to determine the breakage of plastic pipes and fittings subjected to a specified internal pressure.
The system is used to cutting and smoothing plastic pipes. Its strong structure allows processing of a wide range of pipes. All process are fully synchronized, allowing to optimize working time.
Used to determine the impact strength of plastic pipes with circular cross section.
AMSE offers a full range of hollow die punch to obtain specimens of various shapes from samples of films, sheets of polymeric material and other materials by means of dies made of steel as prescribed by international standard.
AMSE offers a full range of hollow die punch to obtain specimens of various shapes from samples of films, sheets of polymeric material and other materials by means of dies made of steel as prescribed by international standard.
AMSE offers a complete range of climatic chambers with temperature and humidity control.
BGD 855 and 856 are accelerated aging floor chambers equipped with fluorescent UV lamps.
BGD 862 is a big Xenon chamber characterized by large dimensions, high lamp power and large surface area of irradiation exposure.
The unit can cool down 60 specimens with dimensions 10x10x55 mm in one cycle.
BGD 866 BGD has the features of the 865 and in addition it also has the device to simulate rain and humidity.
BGD 867 B-SUN is equipped with 3 American lamps and includes control system of moisture and pure water generator.
Used to measure tearing force of plastic films according to the Elmendorf method in accordance with international standards ASTM D 1922, ASTM D 1424, ASTM D 5734, ISO 1974, ISO 9290 and other equivalent.
Chamber for fire tests according to UL94 and other reference standards.
Professional forced ventilation and natural air convection oven suitable for all thermostatic applications where a specific precision is needed.
Professional natural air convection oven and incubator for small scale thermostatic applications.
Professional incubator ideal for all incubating applications where a specific precision is required.
Professional incubator ideal for all incubating applications particularly where the need to work below room temperature is needed.
Muffle furnace especially conceived for thermic treatment, cementation, refiring and normalization.
AMSE offers an instrument for the determination of the carbon black content according to ISO 2530 and ASTM D 1603.
Glow Wire apparatus is designed to simulate real work conditions when hot parts come in contact with materials that may burst to fire.
The teraohmeter model HM 307 DE , complete with measuring electrodes, complies with the international reference standards: ISO284, ASTM D257 and ASTM D1169 .
The apparatus performs comparative tests of tracking index of solid insulating materials in the presence of moisture.
